top of page
Spindle Sander
Level II
Machine Orientation Required
Safety Glasses Required
Machine Orientation Checklist:
Pre-Operation
1. Read operation manual and know how to safely operate equipment.
2. Inspect to make sure the saw is in good working order. If not, fix it, or unplug it, tag it and report it.
3. Spindles are attached using a left thread knurled nut. - lefty tighten
Finger tight is plenty - Do not over tighten
4. Use appropriately sized insert to support work
Post Operation:
1. Return tables to 90 degrees
2. Clean-up all saw dust, leave space cleaner than you found it.
bottom of page